Hyderabad Yellow Pages Online

Home » Products »  ETO Membrane (dissolved oxygen (O2) Removal membrane)

ETO Membrane (dissolved oxygen (O2) Removal membrane)

Price : On Request



ETO membrane is used to remove dissolved oxygen in water. It is operated in three modes according to different deoxygenation efficiency: vacuum, nitrogen sweep, vacuum + nitrogen sweep. Product water oxygen content can be decreased to 3ppb. membrane contactor is a kind of special hydrophobic hollow fiber array made of polymer material. Then the array is spiral-wounded onto a water distribution tube, and then the tube is installed into a housing (at the same time, a baffler is formulated inside the housing).                Hollow fiber → Knitted fiber (under microscope) → Knitted fiber (naked eyes) → End surface   Structure of  membrane contactor:      Features of membrane contactor: 1) Hollow fibers are knitted into an array, so that a certain space can be kept between these fibers. In this way, thousands of fibers are connected as a whole array which can resist strong water flow and will not break. Besides, the mass transfer efficiency can be improved in the array structure. 2) High fiber density makes it possible of ultimate gas removal from water; 3) Central tube water distribution + Middle baffler structure, change the water flow direction to flush vertically towards hollow fibers, which can improve the mass transfer efficiency between shell side and lumen side. In many industrial processes, dissolved oxygen in water has negative influence: corrosion to many materials. It may cause corrosion to pipes, boiler and other related equipments. Membrane contactor system is modular designed, easy to operate, no need of chemical. Compared with vacuum tower and other technology, it has smaller footprint but higher efficiency! membrane contactor can be used for deoxygenation in boiler feed water, semi-conductor and flat plate/TFT process ultra pure water (to prevent crystal plate bending), food & beverage process water, chemical industry process water, oil field reinjection water. According to different deoxygenation efficiency,  membrane contactor is usually operated in the following modes: vacuum, nitrogen sweep, vacuum + nitrogen sweep. Product water oxygen content can be decreased to 3ppb. ·         Specifications of  ETO membrane contactor: Item Parameters Model ETO-6×28 ETO-10×28 Application O2 removal from pure water Flux 1~6m3/h 6~15m3/h Fiber material Polypropylene Dimensions Ø6×28 inch Ø10×28 inch Liquid/gas contact area 45m2 120m2 Inner/outer diameter of fiber 0.2/0.3mm Housing material UPVC PH resistance range 1~13 Working temperature 5~45℃ Max inlet water pressure 6.0bar Connect pipe size DN32 / DN20 DN40 / DN20 Contact:Tel:+86 592 6514970Skype:18060902001WhatsApp:18060902001WeChat:18060902001TM: guochukejiQQ:1641011431
  • Product Details
  • Brand :
  • Place of Origin : FUJIAN
  • FOB Price : On Request
  • Minimum Order Quantity : Not Given
  • Supply Ability :
  • Packaging & Delivery
  • Packaging Detail : Not Given
  • Delivery Detail : Not Given
ETO membrane is used to remove dissolved oxygen in water. It is operated in three modes according to different deoxygenation efficiency: vacuum, nitrogen sweep, vacuum + nitrogen sweep. Product water oxygen content can be decreased to 3ppb.membrane contactor is a kind of special hydrophobic hollow fiber array made of polymer material. Then the array is spiral-wounded onto a water distribution tube, and then the tube is installed into a housing (at the same time, a baffler is formulated inside the housing).              Hollow fiber → Knitted fiber (under microscope) → Knitted fiber (naked eyes) → End surface Structure of  membrane contactor:   Features of membrane contactor:1) Hollow fibers are knitted into an array, so that a certain space can be kept between these fibers. In this way, thousands of fibers are connected as a whole array which can resist strong water flow and will not break. Besides, the mass transfer efficiency can be improved in the array structure.2) High fiber density makes it possible of ultimate gas removal from water;3) Central tube water distribution + Middle baffler structure, change the water flow direction to flush vertically towards hollow fibers, which can improve the mass transfer efficiency between shell side and lumen side.In many industrial processes, dissolved oxygen in water has negative influence: corrosion to many materials. It may cause corrosion to pipes, boiler and other related equipments. Membrane contactor system is modular designed, easy to operate, no need of chemical. Compared with vacuum tower and other technology, it has smaller footprint but higher efficiency!membrane contactor can be used for deoxygenation in boiler feed water, semi-conductor and flat plate/TFT process ultra pure water (to prevent crystal plate bending), food & beverage process water, chemical industry process water, oil field reinjection water.According to different deoxygenation efficiency,  membrane contactor is usually operated in the following modes: vacuum, nitrogen sweep, vacuum + nitrogen sweep. Product water oxygen content can be decreased to 3ppb.·         Specifications of  ETO membrane contactor:ItemParametersModelETO-6×28ETO-10×28ApplicationO2 removal from pure waterFlux1~6m3/h6~15m3/hFiber materialPolypropyleneDimensionsØ6×28 inchØ10×28 inchLiquid/gas contact area45m2120m2Inner/outer diameter of fiber0.2/0.3mmHousing materialUPVCPH resistance range1~13Working temperature5~45℃Max inlet water pressure6.0barConnect pipe sizeDN32 / DN20DN40 / DN20Contact:Tel:+86 592 6514970Skype:18060902001WhatsApp:18060902001WeChat:18060902001TM: guochukejiQQ:1641011431
 
Privacy Policy - Terms of Use - 2011-2015 Hyderabad Yellow Pages Online
Copyright Notice 2011-2015 Hyderabad Yellow Pages Online All rights reserved.
0.02